The Fletcher-Terry Company

Cutting Performance

Corrugated Plastics: up to 1/2" thick (13mm)
Foamboard: up to 1/2" thick (13mm)
PVC: up to 10mm thick using "double blade" knife holder
Aluminum Sheets: up to .080"
Aluminum Composites: up to 4mm

View the Media Finishing Selection Chart

Double-blade knife holder
with protective guard.

Speed Settings

1 = .75 inches per second (Slow Speed)
5 = 4.7 inches per second (Medium Speed)
10 = 5.7 inches per second (Fast Speed)

Recommended Cutting Speeds

Substrate	Thickness	Recommended Cutting Speed*
PVC	2mm	2
PVC	6mm	3
PVC	10mm	2
Aluminum	.040	7
Aluminum	.063	5
Aluminum	.080	5
Dibond	2mm	7
Dibond	3mm	7
Dibond	4mm	7
Alumalite	1/4	7
Coroplast	All Thicknesses	10
Foamboard	All Thicknesses	10
* Number refers to setting on cutting head speed dial

The recommended cutting speeds are to be used as a reference only, it is not meant as a specification or standard, customer should evaluate optimal cutting speed based on individual application requirements.